Definitely Japan. Definitely Kojie.san

Definitely Japan. Definitely Kojie.san 

Skin Whitening that Works!

 

Kojie-san Lightening soap is made of Kojie acid known in Japan, it's a by product of Kojie or malted rice use for Japanese rice wine. It also contains orange, VCO, Glycerin, Vegetable extracts, and Vitamin C.

BUY ONLY ORIGINAL PRODUCTS!!
 

 It is very important that you buy original products on trusted store to avoid skin damage like black spot that you may regret.

You don 't  need to go to Japan to buy original product!!

This is the actual package of  Kojie-san Lightening soap commonly comes in two for only Php 50.00 pesos commercially available in the Philippine.

I suggest to avoid fake products  buy at WATSONS

and..

Have a beautiful skin  like Alodia Gosiengfiao!!

WHAT IS Kojie San

• Kojie.san is the first kojic acid soap to be commercially available in the Philippine market.
• Kojie.san has a micro peeling effect, which makes it a potent whitening product.
• It does not contain any harmful chemicals.
• It contains antioxidants and 100% all natural ingredients.

 How does it Works

My Sister Using this soap for her face and body. What she like in this was it's gentle touch on her skin because it melts fast. Leaving it a few seconds on her skin also gives me this stinging sensation. This stinging sensation says that the product is effective and as far as I know this is where micropeeling occur.

To see best result you must used this regularly but don't forget to apply moisturizer or lotion on your skin after bath because like any other whitening soaps it dries your skin too.I also recommend you to scrub your body to aid removal of dead skin. The result may vary on your skin type.

For More info Visit
http://www.kojiesan.com

Official Page:
https://www.facebook.com/KojiesanPH/

Read More

PLDT SMART HOME 4G Broadband GreenPacket OX-230 (POE)

Premium Outdoor modem to be installed outside, e.g. on the building side wall. Outdoor modem  has a highly sensitive built-in antenna, which ensures a confident signal receipt on the edges of the coverage area, in the countryside and in remote settlements.
Eto yung nakikita nyo Rectangular Shape na Antena  sa mga bubong ng Bahay..

Default GUI :
192.168.15.1
user:smart
password:smart

• Plug and Play 
• No Hassle 
• Stable Connection
• 9kilometers signal reception
• No firmware needed to flash

WiMAX Specification
	Standard • IEEE802.16e-2005 (WiMAX) Wave 2		Maximum RF Transmit Power • 27dBm (combined 2TX) Antenna Type • 14dBi Dual polarization Antena Tecnology • Switched Transmit Diversity • Maximal Ratio Combining • MIMO Matrix A/B • Beam Jamming
	Data Rate • Up to 30 Mbps (DL), 6 Mbps (UL)
	Frequency Range • 2.3 GHz ~ 2.4 GHz (OX 230) • 2.5 GHz ~ 2.7 GHz (OX 250) • 3.3 GHz ~ 3.6 GHz (OX 350)
	Channel Bandwidth • 5, 10 MHz, 7 MHz (OX 350)
	Adaptive Modulation • DL: QPSK, 16QAM, 64QAM • UL: QPSK, 16QAM, 64QAM   (Subject to BS support)
	Electrical & Mechanical
	Dimensions (H x W x D) • 354 x 220 x 68 mm   (Without Mount Kit)		Temperature • 40°C ~ 60°C (Operating) • 40°C ~ 75°C (Storage) Humidity • 10%~85% non-condensing   (Operating) • 5%~95% non-condensing (Storage) MTBF • 50,000 hours
	Weight • < 2Kg
	Surge Protection • 4KV
	Water Proof • IP-67
	Networking
	DNS, NAT, DHCP, VPN & Firewall • Yes		Remote Configuration and Management Protocols • TR069, SNMP v2c, OMA-DM Local Management Protocols • Web browser access, CLI
	Auto Provosioning • OTA (Over-the-air) software upgrade

PLDT SMART HOME 4G Broadband GreenPacket OX-230 Review

• Open port 80 on LAN  and WAN  HTTP
• Open port 443    HTTPS (same lang yung gui sa http )
• Close Port  23  LAN and WAN Telnet
• Open Port  22  LAN and  WAN  SSH  (backdoor ) 
• Command on Change MAC  and Frequency same as on DV-235
• Default log in  user :smart   password:smart   (you can  inject command to change  admin user  nad pass on ssh  )
• Default  IP Gateway  is 192.168.15.1
• NO WiFi

You  can  change mac using a putty  or  use my tools  below  1 click change mac + protection
Connect it  for Globe  and Smart  Frequency    user  admin    include on the editable scripts.
(di ko pa na try sa Globe sa totoo lang )

ADMIN  LOG IN ( If the tools is use )
user:admin
pass:smart

The Scanner   include the  BSID on each  Frequency

Upgrade /Downgrade option is available

Authentication  same  as  DV-235  but  added AES option.

Change Mac Tools

• Install setupssh.exe
• Press Windows Logo on keyboard  and Press R
• type yes 
• run the scripts
• after ma  change mac  may admin na kayo pwede na din yung telnet..  edit nyo lang yung  scripts..
• sa mga walang telnet or ssh  man lang gamit kayo yung mga backdoor tools  meron naman  jan sa tabi tabi  :v  search keyword " dv backdoor "
•  if want nyo open yung telnet log in as smart:smart then open new tab then enable telnet http://192.168.15.1/adv-firewall.htm? 

1.  log in gui 192.168.15.1
   user:smart
   password:smart
2. ganito yung makikita nyo  http://192.168.15.1/index.html?WWW_SID=SID50863
3.  palitan lng yun "index.html into "adv-firewall.html hit enter...   http://192.168.15.1/adv-firewall.?WWW_SID=SID50863
4.  check telnet/ssh  then click save..  

DOWNLOAD

Read More

How to fix Huawei BM622m No Signal Lights , Ready Only, and Continues LAN Refresh +1970

How to fix Huawei BM622m  No Signal Lights , Ready Only,  and  Continues  LAN Refresh. 1970

This happen when you upgrade it to GreenPacket firmware  or  done by wrong flashing or command.

In my case  I accidentally flash it to GreenPacket     via winspreader  I suppose to flash  a DV235t.

Then  I want  it back to 622m firmware and this  what happen

This are the fallowing side effect:

• No signal  Lights
• My LAN  continues  Refresh  connected  disconnected if 622m firmware while on Greenpacket firmware LAN is normally connected.
• 622m web Gui   status  Ready  
• 1970  vintage issue

Other find a solution  use Winpsreader  every time you want to connect ( hustle sign)

How  to Fix Restore your modem settings

 Continues LAN and Ready on Status (Normally this must be connecting not Ready)
1. Get a Winspreader  and   Smart v7  firmware
2. Open a Winspreader   browse the  Smart v7 firmware  Hit start.
3. Plug your Modem  Power and Lan Cable  the  wait  a  few minutes....
4. check the web GUI ..  type the   192.168.254.1  on your browser
5. If you Gui Change to Smart...

Open telnet 192.168.254.1
login: mt7109
password:wimax
sncfg dset ADMIN_NAME admin   (Enter)
sncfg dset ADMIN_PASSWD '$1$k2I9hJe4$OkHKF43oTmjvv3zJtrEZ4.' (Enter)
sncfg commit  (Enter)
/factoryreset.sh  (Enter)

NOTE: Kung tamad kapa i type yan gamit ka scripts pang change mac ng  Greenpacket palitan mo lang ng IP  192.168.254.1


6. After  Reboot  your default gateway should be 192.168.15.1  because that is the default IP for smart.
Open a browser type 192.168.15.1
log in    user :admin  pass:smart

Gawin ganito yung date!!!!!!!!!!  kase walang sync to pc yung 622m

kung connected yung modem auto update yan!

7. Go to Management   -->>  Upgrade  --->> browse your 622m firmware  click TAB Keyboard  Press Enter (bakit tab kase minsan  pag click mo upgrade  browse ulit ma oopen)
wait  10 to  15 minutes   slowly but surely effective flashing...
--mas maganda mag upload sa Firefox

8. After  done Upgrade it will reboot hit that reboot and  wait...

9. reboot done  check ip still 192.168.15.1 (smart)
Open a browser type 192.168.15.1   then you will see  PINK page with error   link is like this  http://192.168.15.1/publicinfo.html

Now open a telnet again
Telnet 192.168.15.1

Login:Firefly
Pass:$P4mb1h1r4N4m4nT0!!
reset   (enter)

Pag REBOOT kuha ka pantusok  press mo yung butas wag ka titigil  hagangat di nag  12345 yung ilaw ng signal ng modem 

NOTE: wag n wag gagamitin eto   pang factory  /etc/default.cfg baka mag kaka hardware atsutsu ka balik na naman tayo sa umpisa nun 1970


10. dahil nag f reset tayo  kung walang telnet yan log in ka
192.168.254.1
username: user
password: 0SlO051O
Open new tab Go to http://192.168.254.1/advanced/acl.html  para maaccess telnet nio.....
CHECK TELNET and click apply...

11. Finally  No signal Light   lagyan ng signal lights

Now open a telnet again
Telnet 192.168.15.1 ( yung IP dipende sa Firmware mo  at user password sa Telnet)

BM622m  Firmware
Login:Firefly
Pass:$P4mb1h1r4N4m4nT0!!  (copy paste mo yan kung windows 8 or 7 ka mouse kung windows 10 ka pwede ctrl+v paste invisible yan press enter)
rm etc/default.cfg  ( Enter )
reboot   (Enter)


Greenpacket or SmartBro
telnetUserName :mt7109
telnetPassword : wimax
rm etc/default.cfg  ( Enter )
reboot   (Enter)

rereboot yan may ilaw na modem nyo. ..

Take Note  yung original MAC and Serial nya sa sticker ay babalik parang  brand new ulit yung modem nyo.. at kung signal light lang habol nyo skip nyo nalang mga  ibang step  diretso na kayo sa step 11

change mac  kayo  kung working yung mac connected  at  yung vintage 1970 issue  solve na

After change mac OK yung signal at  time and date

Optional  kung 169 yung IP mag static saka  ka mag winspreader with 622m firmware kung kaya pa..winspreader kalang try mo lahat ng firmware yung mag papa akyat ng signal.. fix yan.. in this case I start GP firmware di ko kasi alam alin yung inupload nya una. Tapos Smart.. pag ayaw. 622m. Finally 623m umilaw yung signal lights indication ng firmware uploading sequence 1245 24 135 12345 .. ibig sabihin..622m last nyang upload haha.. pahabol try nyo I fix yung ip dipende sa model ng modem ..

Post by Blogmytuts.blogspot.com.

Read More